You have two options to do this:
Disable the motion sensor without using the GRAU App:
Variant with fixed light color 3500K:
- 4× short button press: disable the motion sensor. The status LED on the sensor lights up blue. Tapping again four times enables the motion sensor again, the status LED switches off.
Variant with Color Tune 2700K-4000K:
- 4× short button press of the upper button of the Smart Switch: Disable of the motion sensor. The status LED on the sensor should be blue now.
Pressing again four times activates the motion sensor again, the status LED switches off.
Disable the motion sensor while using the GRAU App:
These settings are only retained if the light is permanently connected to the mains. In the event of a power failure or if the mains plug is disconnected, these settings are lost and must be re-entered. This only affects the settings for the motion detector and auto brightness. All other customized parameters are retained even when the power is disconnected. Only disconnecting the light from the network will result in a complete reset to factory settings.